Here is a small example of our competitively priced Bunning and ECE muck spreader parts. See left, RT500/50, bed drive gear box, same as Bunning Lowlander 120 Mk 4 and numerous other spreaders, or the RT500/60 for only £925 + VAT. We also have the RT800/60 at £1130 + VAT, while stocks last. Please specify input and output shaft sizes when ordering.
All these are on stock at the moment, July 2019.
For tips on how to fit these click the picture
We also have the Bunning Lowlander auger gear boxes, see below.
Hydraulic motor, to fit this bed drive gear box, see below. Many of these parts also fit several other makes of spreader.
Bed Gearbox Pinions
These pinions are for the above gearboxes. The larger for the RT 800 and the smaller for the RT 500. Notice the 3 black circles on the side of the gear boxes above, these pinions fit under the middle one.
Bunning Lowlander Mk 4
One peice auger gearbox, £1810 + VAT and delivery, while stocks last. This gearbox can be fitted to ECE spreaders, see below. On stock at the moment, July 2019
Bunning Lowlander Mk 1 auger gear box
The ones pictured are for 1000 RPM PTO, we stock these because they aren’t easy to get, £460 each plus VAT etc. while stocks last. The ones pictured are identical to the originals, except for the extra shaft and a slightly faster speed so they will need to be fitted as a pair.
On stock at the moment, July 2019. We can get the original ones if required.
540 RPM are usually available over night, direct to you from our supplier and much cheaper , please ask 01609 773 607.
ECE Auger Gearbox
Supplies of these Rogelberg / Rochling gearboxes are very intermittent, We have four of these on stock at the moment ( July 2019 ), two with 6 spline input shaft for 1000 RPM PTO and two with 20 spline input shaft for 540 RPM PTO. We are cooperating with two other UK stockists in order to maintain supplies and we also have an alternative solution to the supply problem, see below. These gear boxes are directly interchangeable with the earlier ones.
We’ve had trouble with muck getting into these gearboxes, click here for tips on how to combat this problem.
Bunning single piece gearbox conversion for ECE
The one piece gearbox is much better and more readily available than the original ECE ones. We have fitted one of these to one of our spreaders. This runs the augers faster thus improving the spread, it’s working very well. This conversion incorporates rubber shock absorbers which most ECEs didn’t have. These rubbers have the advantage of absorbing some of the shock loading. The top picture on the right shows a weld on kit priced at £690 or £2500 including gearbox + VAT and carriage. If you chose this option you are, in effect, getting three new and better gearboxes, better spread, rubber shock absorbers and better reliability and is cheaper than the cost of a set of original gearboxes. The middle picture is one of these gearboxes fitted to one of our ECE spreaders and the bottom one shows how it bolts in. Click here for fitting instructions.
Please note the part no on the rubbers is not correct. I didn’t have the correct rubbers at the time of taking the photo.
Hydraulic motor for Bunning Lowlander 120 mk 4 bed drive also ECE and numerous other spreaders, £189 plus VAT etc. While stocks last.
Larger motors also on stock please ring for info, 01609 773607.
This auger flighting is the same size and shape as Bunning Mk 4. Although the pitch and teeth spacing is different to ECE and earlier Bunnings we have used it successfully on these machines. We have this on stock at the moment, July 2019, £130 per segment for 10mm thick and £150 for 12mm plus VAT and carriage. We can get the flighting for other models but we get it made abroad so it will take a while.
Bed Shaft Bushes
These bushes come in several sizes and materials: Bronze, cast iron, and composite. The metal ones are better but composite is fine for the idler shaft and maybe the non gearbox side of the drive shaft. Bronze seems to have gone out of fasheon. When ordering please specify material and all dimensions. Click here for bushes list If your bush isn’t on the list please ask 01609 773607.
Bed / Floor Bars
If you wish to order bed bars, please specify the dimensions x, y and z, see sketch right, these are the earlier chanel ones £26 each plus VAT and carriage. For the later Bunning Lowlander all box ones all we need is the overall length.
The box for the sockets on the chanel ones, is an unusual size so if you want to replace them make sure you get box with 5mm wall, or we can supply new sockets.
Bed / Floor Chains
On our ECE spreaders we use bed chains with a larger pitch than origional. This allows us to use sprockets with thicker teeth, which we find is a big advantage as they last longer. We have also manged to use these sprockets on worn ECE chains, as the wear causes the chain to have a larger pitch. This can increases the lifespan of the chain, as the larger pitch of the sprockets better fits the worn pitch of the chains.
Bunning / ECE Bed / Floor Drive Spockets
As you will be aware the drive shaft will need to come out in order to fit these,click here for tips on how to do this.
PLEASE NOTE: Use this advice at your own risk. We are not liable for any damages.
Bunning Ece Auger Teeth / Strippers
The genuine Bunning parts are made from High tensile steel and are very good on young spreaders, however we find that when spreaders get a bit of age on them the augers become weak, so hopefully these mild steel ones will bend when encountering stones, and thus reduce the stress on the auger. We can supply genuine if required. Please specify width and thickness when ordering, see below.
- 40 x 12mm, £5 each or £3.60 if you order more than 30.
- 50 x 12mm, £5.50 each or £3.90 if you order more than 30.
- 50 x 15mm, £6.50 each or £4.70 if you order more than 30.
- Price for genuine to follow or please ask, 01609 773 607.
- All prices plus VAT etc.
- 60mm Wide x 380mm Diameter – £35 Per Pair + VAT
- 80mm Wide x 400mm Diameter – £43 Per Pair + VAT
- 90mm Wide x 300mm Diameter – £38 Per Pair + VAT
PLEASE NOTE: While stocks last. – Prices will be more if we can’t have your old ones back, in a repairable condition. – Other sizes are available, or we can have your old ones relined.